Vertical Dome Fiber Optic Splice Closure / Splicing Box/Join Enclosure
Vertical Dome Fiber Optic Splice Closure / Splicing Box/Join Enclosure Fiber Equipment Fiber Optic Components Kota Kinabalu  | Startech IT Sdn Bhd
Optical Cable Splice Enclosure Box

1.FTTx application
2.multi-layer design
3.2 inlet&16 outlet
4.wall or pole mou

FTTH Waterproof optical fiber splice box
Description
The UDM Splitter Terminal box is rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx
Features 
· Indoor or outdoor rated
· Available 1x4, 1x8, 1x16 splitter as well as 2x4, 2x8, 2x16 splitter
· Suitable for wall-mounting or pole mountingapplication.
· Max. up 16 pcs of FTTH drop cable or pigtails
· Suitable for wall-mounting or pole mounting application.
· 2 inlet ports and 16 outlet ports
Application
· FTTH, FTTB, FTTC
· Telecommunication Network
· CATV
· Local Area Network
optic fiber enclosure

dome/vertical splice closure

in line/herizontal splice closure

optic fiber splice closure 

Operation conditions:

1.Temperatures: -40°C~+60°C

2.Humidity: ≤95% (at 40°C)

3.Air Pressure: 70kPa ~106kPa

Technical Specifications:

1.Seal performance: after the box is sealed, inflate to 100kPa inwards (inflation only apply to the models with the air hole), and then soak it in the water of normal temperature, after 15 minutes of steady observation, there is no bubble to overflow.

2.Insulation resistance: the insulation resistance between the metal work piece and the earth is greater than 20kM.

3.Pressurization: there is no breakdown or flashover under 15kVdc/1min between the metal work piece and the earth.

4.The curvature radius of the fiber 40mm, without extra loss inside the splice tray.

5.It can bear the axial tensile strength no less than 1000N.

 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version